[ Click on any thumbnail to see a larger image ]
|
|
The stern of Vasa. All sculptures were carved by hand using a #11 exacto blade. Byrne's table saw, thickness sander, and disk sander were used in order to produce blanks for the sculpture. |
|
A view of the model from the starboard side bow. This model is framed as the original is, with floor timbers futtocks and top timbers. |
|
A close up of the beakhead. |
|
Looking aft along the weather deck. |
|
Finished upper gundeck. All decks were built besides the orlop, and in the way that the originals are put together. |
